HS Series Generation 2 Replacement Humidity & Temperature Sensors for CD2, HD2 & HO2 Plant Room Sensors and CW2 & HW2 Living Space Sensors - Installation Instructions

Living Space Products: HS Series Generation 2 Replacement Humidity Sensors work with the CW2 and HW2 Series (with humidity option only. The CW2 and HW2 Series sensors use an onboard RH sensor. When a replacement sensor is installed into the socket on the CW2 or HW2, the reading from the replacement sensor is used. The replacement sensor can subsequently be replaced as needed. Plant Room Products: HS Series Generation 2 Replacement Humidity Sensors and TS Temperature only or Temperature and Humidity sensors work with CD2, HD2 and HO2 Series Plant Room Sensors (with humidity and temperature options). These sensors use on-board RH sensor and solid state temperature sensors to be used on analog transmitters or protocol models. The sensors are factory calibrated and offered in various configurations based on the end application need. When a replacement is installed into the socket, the reading from the replacement sensor is used. The replacement sensor can subsequently be replaced as needed.